5gallon Automatic PET water bottle blow moulding machine 10-20L
YCQ-20L-1 5 gallon PET blow moulding machine is used to produce 5gallon PET bottle that is now demanded extremely in the market. Facing great demand for 5 gallon PET bottle at market, we will certainly become the right machine for your investment. The whole procedure is automatic. It is controlled with microcomputer. In order to achieve the purpose of automatic transporting bottles, the user should connect the conveyor belt with the blow molding machine. By transmission device, the machine can be connected to the filling machine directly and start inline filling.
Features:
1. Easy to operate by using full autoamtic human-machine interface. PET bottle blowing machine runs smoothly at very high speed.
2. Every parts of whole machine is selected properly and treated precisely.
3. PET bottle blowing machine adopts advanced intermittent preform loading syestem.
4. Conveying preforms automatically with conveyor.
5. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
6. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
7. Action and blowing gas path design divided into three parts, in order to meet the needs of bottle blowing, action of different pressure;
8. No contamination and low noise.
9. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
10.Strong clamping force with high pressure and double crank links to lock the mold.
11.Two ways of operating: automatic and manual.
12.Safe,reliable,and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
13.Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
14.Contamination is avoided for the bottle body.
15.Ideal effect of the chilling with the chilling system.
16.Easy installation and starting;Low rejection rate: less than 0.2 percent.
Parameters:
|
Model |
YCQ-10L-1 |
YCQ-20L-1 |
Bottle type specification |
Cavity |
1 |
1 |
Theory output |
500 |
300 |
|
Max.volume |
10L |
20L |
|
Bottle mouth maximum overall diameter |
150mm |
150mm |
|
Bottle biggest diameter |
240mm |
350mm |
|
Bottle maximum height |
450mm |
550mm |
|
Power specifications |
Light tube quantity |
48pcs |
48pcs |
Maximum heating power |
72KW |
72KW |
|
All electric machine installation |
75KW |
75KW |
|
Actual consumption |
37.5KW |
52.5KW |
|
Air pressure specification |
Work pressure |
7-9kg/c㎡ |
7-9kg/c㎡ |
Low-pressure gas consumption |
1600L/min |
1600L/min |
|
Blow bottle pressure |
25-35kg/c㎡ |
25-35kg/c㎡ |
|
Higher -pressure gas consumption |
2000-3000Ltr/min |
2000-3000Ltr/min |
|
Forzen water specification |
Work pressure |
5-6 kg/c㎡ |
5-6 kg/c㎡ |
Temperature range |
10℃ |
10℃ |
|
Consumption |
8800kcal/hr |
12000kcal/hr |
|
Forzen water flow |
88L/min |
88L/min |
|
Machine specification |
Size of the machine |
2.7x1.5x1.7 |
5.2x2.0x2.0 |
Weight of the machine |
3.6ton |
6ton |